122
Configuring a Kaleido-X16 Cascade
Configuring Layouts for a Cascade Room
and then select the next multiviewer from the
Layer 2 head (for cascade
configuration)
list:
• In the case of a cascade with two multiviewers, select the other multiviewer (i.e. the
one farthest from the monitor wall) from the
Layer 2 head (for cascade
configuration)
list.
3 In the case of a dual-head cascade, repeat the procedure to configure the head
assignments for the other head.
4 On the
File
menu, click
Save
.
The updated room configuration is automatically propagated to the other multiviewers
in the cascade.
Configuring Layouts for a Cascade Room
Creating cascade layouts is no different than creating any regular layout. The only limitation
is that all layout creation and configuration must be performed in online mode, while
connected to one of the cascade members.
• When you configure layouts for a cascade room, all channels from all the multiviewers
associated with this cascade room are available.
• When you save a cascade layout, any changes are automatically propagated to the
other multiviewers in the cascade.
Summary of Contents for Grass Valley KALEIDO-X16
