Belden Grass Valley KALEIDO-X16, Installation & Service Manual

Page: 124 / 152

124
Configuring a Kaleido-X16 Cascade
Cascade Upgrade
3 Insert the USB key into any of the USB ports on the first multiviewer.
After a while, a message appears at the bottom left corner of the monitor wall,
reporting that the Upgrade Manager is verifying software, firmware, and safe mode
versions. Once the verification process is complete, you will be advised what upgrade
action, if any, needs to be performed. Then, after 30 seconds, the upgrade process
begins automatically, starting with the software upgrade.
When the entire upgrade process has successfully completed, a red button appears at
the bottom of the upgrade dashboard, prompting you to restart the system.
4 From a workstation on the same subnet, open a Web browser window and type the IP
address of the multiviewer, in the address bar.
The Kaleido Software home page appears.
5 Click the XAdmin button.
The XAdmin Status and Options page appears.
6 Click the Reset button ( ) at the end of the top heading row to restart the multiviewer
remotely, directly from your Web browser.
7 Remove the USB key from the current USB port, insert it in any USB port on the next
multiviewer, and repeat the procedure (from step 3 ), until you have updated all
multiviewers in this cascade.
Firefox users:
If you see a security warning instead of the home page, then see Registering
your Multiviewer's Security Credentials with your Browser on page 65.
Internet Explorer users:
• If the page remains blank, then see Enabling the Compatibility View in
Internet Explorer on page 74.
• If you see a certificate error message instead of the Status and Options
page, then see Registering your Multiviewer's Security Credentials with
your Browser on page 65.
Reset