Belden Grass Valley KALEIDO-X16, Installation & Service Manual

Page: 120 / 152

120
Configuring a Kaleido-X16 Cascade
Adding Multiviewers to a Cascade
The Add Multiviewer to Cluster window appears.
3 If your PC and the multiviewer you wish to add are on the same subnet, then you can
select the multiviewer’s IP address from the list. Otherwise type the appropriate IP
address in the box.
The multiviewer is added to the System list.
4 Repeat from step 2 if this cascade system includes a third multiviewer.
Note:
The system type is automatically adjusted based on the actual target
system.