background image

 

1

User Manual 

Welcome  to  use  Soft  LED  Display  system,  in  order  to  use  this  product  with  
security, reliability and convenience, please read the instruction carefully and 
comply the guide before using this product. 

   

 

. Safe Caution 

1.

 

After receiving the new Soft LED Display, please open the packing case to check the 

goods and all other accessories whether they are consistent with packing list, in case 

finding something broken, please contact the reseller or distributor to repair or change. 

2.

 

The connection, installation and operation of Soft LED display should be processed as per 

instruction by special person. 

3.

 

Soft LED display should be far from the place of flammability, explode and heating. 

4.

 

Soft LED display should be installed in the place of well ventilation. 

5.

 

Soft LED display should be installed far from the children’s reach. 

6.

 

Never try to trample and tear the Soft LED display, keep the internal cable connection and 

electronic in order. 

7.

 

Keep the hard or sharp article from lacerating the product. 

8.

 

Prohibit sinking into the pouring water or other liquid. 

9.

 

Handle with care when install and disassembly the Soft LED display to avoid the damage 

of the connecting wire and other electronic component. 

10.

 

The power cable should be connected to the power supply with ground. 

11.

 

Prohibit connecting the power when soft LED display was folded. 

12.

 

Before finishing the installation, please do not connect the power. 

13.

 

Must cut off all power before replace and maintainence the power adapter. 

14.

 

Not to take off the protecting clothing at the back of the display.  

15.

 

When there is wind, the display should be fixed firmly with safe belt. 

16.

 

When folding the Soft LED display

the surface of the curtai should be face to face

.

 

17.

 

Please comply with the local relative regulations.

 

 

. Characteristic 

1.

 

SMD RGB 3-in-1LED, small, bright and colorful, can display clear and smooth image 

2.

 

Soft and flexible, can be folded and curved, suitable for many shape application; 

3.

 

Against fire, water, dirt; 

4.

 

Small volume and light weight

easy installation and transportation. 

5.

 

Multipurpose function, suitable for various situation. 

6.

 

Easy connection and combination. 

7.

 

elegant shape;.

 

 

 

 

 

Summary of Contents for FLC-2500




















Reviews: