Belden Grass Valley KALEIDO-X16, Installation & Service Manual

Page: 37 / 152

37
Kaleido-X16
Hardware Description & Installation Manual
USB
The Kaleido-X16 has three USB 1.0 connectors (see USB , on page 146 for specification
details). Connect a mouse, keyboard, or USB flash memory for a software upgrade or data
backup. Two connectors are on the rear connector panel, and one is on the front of the
frame behind the front cover.
Two USB connectors on the rear panel
One USB connector on the front of the frame
Commissioning the Multiviewer
To make the multiviewer operational, first power it up and then interconnect the
multiviewer with its associated equipment.
Powering up the Kaleido-X16
Separate AC power sockets serve the two power supplies. On the rear of the frame, connect
both power sockets of the Kaleido-X16 to an appropriate power source using the supplied
power cords.
As seen from the rear of the frame:
• The left power socket is for PSU B.
• The right power socket is for PSU A.
Two USB connectors
USB (1) connector on front of Kaleido-X16