Belden Grass Valley KALEIDO-X16, Installation & Service Manual

Page: 150 / 152

150
Specifications
RS-422 Connection Diagram
Standard wiring between multiviewer and devices wired to SMPTE “slave” specification (e.g. most
routers, Ross Synergy switchers, Nevion ETH-CON)
Standard wiring between multiviewer and devices wired to SMPTE “master” specification (e.g. Philips
Jupiter router control system, Grass Valley Presmaster PCS)
For more information about RS-422 specifications, see RS-422 , on page 145. For more
information about RS-422 serial connections, see “Serial Connections” in the “Routers”
chapter of the Kaleido Software User’s Manual. See
Related Documentation , on page 15.
Note:
The two RS-422 ports on the Kaleido-X16 side have no ground pin.
Using the appropriate DE-9S-to-RJ-45 adapter, an external device should be
able to communicate with a Kaleido-X16 despite the lack of a ground.
Pinout of an RS-422
port’s RJ45 connector
on the multiviewer
Pinout of straight adapter (Grass
Valley part no. 1737-3000-102)
RJ45 DE-9 male DE-9 female
Pinout of RS-422
connector on SMPTE
slave device
Pinout of an RS-422
port’s RJ45 connector
on the multiviewer
RJ45 DE-9 male DE-9 female
Pinout of crossover adapter (Grass
Valley part no. 1792-3700-100)
Pinout of RS-422
connector on SMPTE
master device