Belden Grass Valley KALEIDO-X16, Installation & Service Manual

Page: 29 / 152

29
Kaleido-X16
Hardware Description & Installation Manual
Inputs
Video Signals
The 16 BNC Input connectors located on the Kaleido-X16 frame’s rear connector panel
support HD/SD/3 Gbps SDI or composite video inputs 1 to 16 (see Video Signal Inputs , on
page 139 for specification details).
Graphic Signals
The Kaleido-X16-D supports two digital DVI inputs, one for each of two heads (the
Kaleido-X16-S supports a single DVI input). The DVI IN connectors on the rear panel are
female, dual-link DVI-I universal connectors. The supported signal and cabling for this
connection is single-link DVI-D (see
DVI Graphic Inputs , on page 141 for specification
details).
Mosaic Outputs
HDMI Outputs
There is one progressive scan HDMI output for each output head (MV OUT 1, MV OUT 2).
See
HDMI Outputs on page 141 for specification details. The HDMI connection is a high
USB USB Connect a mouse, keyboard, or USB flash memory for
software upgrade or data backup.
Note:
There are three USB ports, one on the front of the
frame (behind the front cover) and two on the rear
connector panel.
RS-422 RJ-45 (see RS-422
Connection
Diagram
, on
page 149)
Connect to an RS-422 (SMPTE ST 207, EBU-3245) or RS-
485 device or network.
Connector label Connector type Function
Note:
The two DVI inputs cannot be crossed nor combined. That is, DVI IN 1
must output on Head 1, and DVI IN 2 must output on Head 2.
BNC connectors (16) for SD-SDI, HD-SDI,
3Gbps-SDI, and Analog Composite Inputs
DVI-D In1 DVI-D In2