Belden Grass Valley KALEIDO-X16, Installation & Service Manual

Page: 136 / 152

136
Kaleido-IP/Kaleido-X16 Cascade Step-by-Step Configuration
Cascade Upgrade
The system prompts you to confirm.
10 Click Yes to proceed.
Your multiviewer will shut down, and then start again. This may take a while.
Once the multiviewer has restarted, the system notifies you.
11 Click OK .
The XAdmin Status and Options page appears.
12 Verify that the expected version number appears in the page title (check the tab label,
or the browser’s title bar).
At this point the Kaleido-IP upgrade is complete, and you can now proceed with
upgrading the Kaleido-X16.
13 Copy the Kaleido-X16 upgrade package files to a USB key (see Preparing a USB Key on
page 107).
14 Insert the USB key into any of the USB ports on the Kaleido-X16.
After a while, a message appears at the bottom left corner of the monitor wall, report-
ing that the Upgrade Manager is verifying Kaleido Software, firmware, and safe mode
versions. Once the verification process is complete, you will be advised what upgrade
action, if any, needs to be performed. Then, after 30 seconds, the upgrade process
begins automatically, starting with the Kaleido Software upgrade.
When the entire upgrade process has successfully completed, a red button appears at
the bottom of the upgrade dashboard, prompting you to restart the multiviewer.
15 Click the Upgrade complete button to restart the system.