19
Kaleido-X16
Installation & Service Manual
Kaleido-X16-D
There are two heads (Head 1 and Head 2) on the dual-head Kaleido-X16 (Kaleido-X16-D).
The Input and Output connections are as follows.
The rear connector panel for this model is displayed, below:
Kaleido-X16-S
There is one head (Head 1) on the single-head Kaleido-X16 (Kaleido-X16-S). The Input and
Output connections are as follows.
The rear connector panel for this model is displayed, below:
Optional Ancillary Equipment
The following optional equipment may be supplied with your order.
• Kaleido RCP-2 or RCP-200 multi-function remote control panel
•
Audio Bridge Terminal (ABT)
Functional block diagrams
The following diagram shows a basic Kaleido-X16 system configuration, with a single
Kaleido-X16 feeding 2 monitor wall displays. The Kaleido-RCP2 would be located on the
production desk, while the Client PC could be anywhere with Internet access to the
network.
The diagram below shows a Kaleido-X16 system with its inputs and outputs. Examples of
the various external devices that connect to the Kaleido-X16 are also shown.
Connector
Number of connectors on Head 1
Number of connectors on Head 2
MV OUT
1
1
SDI OUT
1
1
DVI IN
1
1
Connector
Number of connectors on Head 1
MV OUT
1
SDI OUT
1
DVI IN
1
No
Head 2
connectors equipped
(DVI IN2, SDI OUT2, MV OUT2)
Summary of Contents for Grass Valley KALEIDO-X16
