Beckman Coulter AU5800 Quick Manual Download Page 92

Page: 92 / 174

B00418AA

4-26

Processing Samples

4.7 Processing Emergency Samples

Red racks are used for analysis of emergency samples. Emergency samples can
be processed with priority over routine samples. Emergency samples are
identified by an “E” sample number prefix in the requisition and sample
results.

4.7.1 Processing emergency samples in red racks from the priority rack set

unit

4.7.2 Processing emergency samples in red racks from the rack set unit

4.7.3 Requisition for an Emergency Sample

4.7.1 Processing emergency samples in red racks from the priority

rack set unit

Place a red rack on the priority rack set unit, position 1 or 2. Press

Start

For details on the priority rack set position, refer to

4.5 Add Racks to the

Priority Rack Set Unit

in this chapter.

4.7.2 Processing emergency samples in red racks from the rack set

unit

Place a red rack on the rack set tray on the rack set unit. Press

Start

B00418AA_AU5800 QRG_EN.book Page 26 Monday, December 13, 2010 9:59 AM

Summary of Contents for AU5800















































































































































































Search results

Summary of Contents for AU5800

Reviews:

Related manuals for AU5800

Brands by name

Popular brands

Beckman Coulter AU5800, Quick Manual

Search results

Summary of Contents for AU5800

Reviews:

Related manuals for AU5800

Brands by name

Popular brands