B00418AA
3-17
Daily Start Up
3.5 Check Reagent Status
3
TIP
When the analyzer has turned on after an
End Process
, all tests initially
show <30 shots without a volume indicator bar. Select
Reagent Check
(F5) > Check all positions
to determine the number of shots (tests)
remaining.
* 2-tests/1 reagent means the same reagent is used for two tests. Program this
option in
Menu List > Parameters > Common Test Parameters > Test
Name
by assigning the same reagent ID for both tests.
Details Tab
Home > Reagent Management > Details
Figure 3.4
Item
Description
Type:
Select Serum, Urine, Other-1, Other-2
Unit No.:
Select the unit number to display
Reagent Display:
Select Test (displayed by test) or Position (displayed by position)
Content:
Select All or a specific test
Pos.:
R1 or R2 reagent position
B00418AA_AU5800 QRG_EN.book Page 17 Monday, December 13, 2010 9:59 AM
