Beckman Coulter AU5800 Page 28 Quick Manual Download

Page: 28 / 174

B00418AA

2-14

System Overview

2.4 Software Description

Message

Displays messages regarding system conditions that could affect analysis
results.

Color-coding indicates the level of the message:

If an appropriate message is selected, a window to instruct the operator in the
required action will be displayed. Selecting

opens the appropriate menu to

perform the required corrective actions.

TIP

A red Message or highlight on the analyzer picture indicates a condition
that prevents starting that unit.

Red:

Analysis cannot be started on a unit until the message is
addressed.

Orange:

Analysis can be started. Review the message carefully and take
appropriate action.

Yellow:

Analysis can be started. Review the message carefully and take
appropriate action. The message can shift to Orange status (more
critical).

Green:

A notification of system status. There are no operational
problems.

B00418AA_AU5800 QRG_EN.book Page 14 Monday, December 13, 2010 9:59 AM

Summary of Contents for AU5800















































































































































































Search results

Summary of Contents for AU5800

Reviews:

Related manuals for AU5800

Brands by name

Popular brands

Beckman Coulter AU5800, Quick Manual

Search results

Summary of Contents for AU5800

Reviews:

Related manuals for AU5800

Brands by name

Popular brands