Beckman Coulter AU5800 Quick Manual Download Page 35

Page: 35 / 174

B00418AA

3-3

Daily Start Up

3.1 Start the System

a. Enter the User Name.

b. Enter the Password.

c. Select

. The New Index window opens.

TIP

If the system was shut down without performing an End Process,
the System Start window to retrieve the Database appears.
Select

The New Index window is only displayed at the time of system
startup.

a. Enter a new index as needed. Select

New Index

Index

b. Select a Group of Tests from the drop down menu.

c. Select

Home

displays.

3.1.2 Set the Start Conditions

This menu is used to create a data index, select a Group of tests, and input the
operator name.

An index is a data file identified by the date and time. Create a new index daily,
each shift, or as needed.

Select

Home > Start Condition

Select

Edit (F1)

B00418AA_AU5800 QRG_EN.book Page 3 Monday, December 13, 2010 9:59 AM

Summary of Contents for AU5800















































































































































































Search results

Summary of Contents for AU5800

Reviews:

Related manuals for AU5800

Brands by name

Popular brands

Beckman Coulter AU5800, Quick Manual

Search results

Summary of Contents for AU5800

Reviews:

Related manuals for AU5800

Brands by name

Popular brands