B00418AA
6-27
As Needed Tasks
6.7 Print Results
6
4
For “Search Sample No.”, enter the sample number range to print, or
leave the “*” to print all samples.
TIP
If the “Search Sample No.” is left blank or empty no search
criteria is used to perform the search.
5
For “QC/Cal. No.” enter the QC number (1 to 100) or the calibrator
number (1 to 200), or leave the “*” to print all QC and calibrator
numbers.
6
For “Search Control / Calibrator ID” enter the QC or calibrator
barcode number to print samples with a specific QC or calibrator ID.
7
Check the “Data Not Transferred to Host” box to print only the
samples that have not been transferred to the host. Check the “Data
Not Printed” box to print only the samples that have not been printed.
8
Select
Print (F8)
.
9
Select the “List Format” to print.
10
At
Reporter
, the Operator Name entered in
Start Condition
displays.
If necessary, enter a new name or use
Select
to enter a pre-
programmed comment. “Reporter” is an option that can be added to a
list format, and only prints if it is formatted.
11
Select
OK
. This list begins printing.
12
Select
Print Stop (F8)
to abort printing.
B00418AA_AU5800 QRG_EN.book Page 27 Monday, December 13, 2010 9:59 AM
