Beckman Coulter AU5800 Quick Manual Download Page 85

Page: 85 / 174

B00418AA

4-19

Processing Samples

4.6 Requisition for Routine and Emergency Samples

Select

Exit (F1)

TIP Pending List (F4)

View a list of samples that have been requisitioned, but not yet
processed on the analyzer. Select a Sample No. or Sample ID
number, then select

to view the specific sample requisition.

Add-On (F5)

“Add-On” a test to a previously processed sample in the white
rack. Run the sample again in the white rack to perform the add-
on test(s).

Delete Requisition (F6)

This function is used to delete registered requisition information
before the start of analysis. Select each “Sample Kind”, then
specify the Sample No. or Sample ID to delete.

WARNING

“Sample Volume (µL)” does not include the dead volume.
Approximate values are shown.

B00418AA_AU5800 QRG_EN.book Page 19 Monday, December 13, 2010 9:59 AM

Summary of Contents for AU5800















































































































































































Search results

Summary of Contents for AU5800

Reviews:

Related manuals for AU5800

Brands by name

Popular brands

Beckman Coulter AU5800, Quick Manual

Search results

Summary of Contents for AU5800

Reviews:

Related manuals for AU5800

Brands by name

Popular brands