Avaya Media Gateway G250, Administration Manual

Page: 71 / 840

Managing login permissions
Issue 5 June 2008 71
●
Enter
set port dot1x supp-timeout
, followed by the module and port number (or
range of ports) and a time period in seconds (0 to 65535), to set the
authenticator-to-supplicant retransmission timeout period (the time for the G250/G350 to
wait for a reply from the Authenticated Station) for a specific port or ports.
●
Enter
set dot1x max-req
, followed by a number from 1 to 10, to set the maximum
number of times the port tries to retransmit requests to the Authenticated Station before
the session is terminated for all ports on which 802.1x is enabled.
●
Enter
set port dot1x max-req
, followed by the module and port number (or range of
ports) and a number from 1 to 10, to set the maximum number of times the port tries to
retransmit requests to the Authenticated Station before the session is terminated for a
specific port or ports.
●
Enter
set dot1x re-authperiod
, followed by the length of the new re-authentication
period in seconds (0 to 65535) to set change the re-authentication period, which is the
interval between a port’s attempts to re-authenticate the host if re-authentication is
enabled on the port.
●
Enter
set port dot1x re-authperiod
, followed by the module and port number and
the length of the new re-authentication period in seconds (0 to 65535) to set change the
re-authentication period for a specific port, which is the interval between the port’s
attempts to re-authenticate the host if re-authentication is enabled on the port.
●
Enter
set port dot1x server-timeout
, followed by the module and port number (or
range of ports) and a time period in seconds (1 to 65535), to set the server timeout (the
time to wait for a reply from the Authentication Server) per port.
●
Use the
set dot1x lldp tlv
command to specify that if LLDP is enabled, then upon
802.1x authentication of a supplicant, the G250/G350 transmits the port LLDP information
(PVID, Port VLAN) in the LLDP packet sent to the supplicant.
Displaying 802.1x parameters
●
Enter
show dot1x
to display the system 802.1x parameters, including whether 802.1x is
enabled or disabled on the G250/G350 and the Supplicants’ status.