Avaya Media Gateway G250, Administration Manual

Page: 172 / 840

Configuring Standard Local Survivability (SLS)
172 Administration for the Avaya G250 and Avaya G350 Media Gateways
●
No Deleted Digits
●
Inserted Digits
3. At the SAT, enter
list ars analysis
to search the ARS Analysis table for row entries
whose Route Pattern field matches the route-pattern value(s) that were obtained in Step
1. Once you discover a match with Route Pattern , use the entries from this row in the
ARS Analysis table to complete the following three entries for the SLS Dial-Pattern table
(see
Table 45 ):
●
Min
●
Max
●
Dialed String
Collecting Incoming Call Handling data
To gather the Incoming Call Handling Treatment and ARS Digit Conversion information in
Communication Manager, you must first know which trunk groups are assigned to the gateway
of interest. After verifying this information, perform the following steps:
1. At the SAT, enter
display inc-call-handling-trmt trunk-group n
, where
n
is
an administered trunk group.
2. For each entry, read the values of the following fields (see Table 46 ):
Table 45: ARS Dial Patterns for SLS
CM Form Page Field Name Notes
Route-Pattern 1 No. Del Digits Specifies the number of dialed digits to be
deleted from the beginning of the dialed
string. The default is 0.
Route-Pattern 1 Inserted Digits Specifies the digit string to be inserted at
the beginning of the dialed string. The
default is blank.
ARS Analysis 1 Dialed String Dial string entry that is used to match a
pattern within the user-dialed number
ARS Analysis 1 Min Minimum length of the user-dialed number
that the SLS call engine collects to match
to the dialed-string. The default is the
length of the specified dialed-string
element.
ARS Analysis 1 Max Maximum length of the user-dialed number
that the SLS call engine collects to match
to the dialed-string. The default is the
length of the dialed-string element.