Avaya Media Gateway G250, Administration Manual

Page: 382 / 840

Configuring advanced switching
382 Administration for the Avaya G250 and Avaya G350 Media Gateways
VLAN CLI commands
The following commands are used to configure VLANs. For more information about these
commands, see
Avaya G250 and Avaya G350 CLI Reference , 03-300437.
●
Use the
clear port static-vlan
command to delete VLANs statically configured on
a port
●
Use the
clear vlan
command to delete an existing VLAN and its interface, remove the
entry from the VLAN table, and return ports from this VLAN to the default VLAN 1. When
you clear a VLAN, all ports assigned to that VLAN are assigned to the default VLAN 1.
●
Use the
interface vlan
command to create a VLAN interface, enter it into the VLAN
table, and enter the Interface VLAN configuration mode
●
Use the
no interface vlan
command to delete a VLAN interface and remove the
entry from the VLAN table
●
Use the
set port static-vlan
command to assign static VLANs to ports
●
Use the
set port vlan
command to set the port VLAN ID (PVID)
●
Use the
set port vlan-binding-mode
command to define the binding method used
by ports
●
Use the
set trunk
command to configure the VLAN tagging mode of a port
●
Use the
set vlan
command to configure VLANs
●
Use the
show cam vlan
command to display all mac entries in the CAM table for a
specific vlan
●
Use the
show interfaces vlan
command to display interface configuration and
statistics for a particular VLAN or all VLANs
●
Use the
show port vlan-binding-mode
command to display port VLAN binding
mode information. If no module number is specified then information for all ports on all
modules is displayed. If no port number is specified, information for all ports on the
specified module is displayed.
●
Use the
show trunk
command to display VLAN tagging information for the switch
●
Use the
show vlan
command to display the VLANs configured in the switch
VLAN configuration examples
The following example deletes a statically bound VLAN from a port:
G350-001(super)# clear port static-vlan 10/3 34
VLAN 34 is unbound from port 10/3