Avaya Media Gateway G250, Administration Manual

Page: 417 / 840

Configuring and analyzing RTP statistics
Issue 5 June 2008 417
Analyzing RTP statistics output
This section describes the reports, statistics, and traps you can view, how to view them, and
how to understand the output.
Viewing RTP statistics summary reports
RTP statistics summary reports display QoS trap statistics for the VoIP engine(s).
●
Enter
show rtp-stat summary
. For example:
Table 109 describes the fields in the summary report.
G350-001(super)# show rtp-stat summary
Total QoS traps: 23
QoS traps Drop : 0
Qos Fault
Engine Active Total Mean Tx
ID Description Uptime Session Session Duration TTL
--- -------------- ----------- ------- ------- -------- ----
000 internal 04,18:15:15 2/1 35/24 01:04:44 64
Table 109: RTP statistics summary reports output
Field Description
Total QoS traps The total number of QoS traps sent since the RTP statistics
application was enabled or since the last use of the
rtp-stat
clear
command
QoS traps Drop The number of QoS traps dropped by the rate limiter since the RTP
statistics application was enabled or since the last use of the
rtp-stat clear
command
Qos Fault/QoS
Clear General QoS state: QoS Fault means that the number of active RTP
sessions with QoS faults is currently higher than the QoS fault
boundary. QoS Clear means that the number of active RTP sessions
with QoS faults is currently less than or equal to the QoS clear
boundary. You can configure the QoS fault and clear boundaries
using the
rtp-stat fault
command. See Configuring QoS fault
and clear traps on page 416.
Engine ID The ID of the VoIP engine. Since the G250/G350 has one VoIP
engine, one line appears in the table.
Description Description of the VoIP engine
1 of 2