Avaya Media Gateway G250, Administration Manual

Page: 243 / 840

Summary of Logging configuration CLI commands
Issue 5 June 2008 243
clear logging file
Delete the message log file being stored in non-volatile
memory (NVRAM), including the history log, and open a
new, empty log file
clear logging server
Delete the specified Syslog message server from the
Syslog server table
set logging file
Manage the logging of system messages to non-volatile
memory (NVRAM)
set logging server
Define a new Syslog output server for remote logging of
system messages
set logging server
access-level
Set the access level associated with a Syslog server
sink
set logging server
condition
Set a filter for messages sent to the specified Syslog
server. Messages can be filtered by source system,
severity, or both.
set logging server enable |
disable
Enable or disable a specific Syslog server
set logging server facility
Define an output facility for the specified Syslog server
set logging session
Manage message logging for the current console
session
show logging file condition
Display all conditions that have been defined for the file
output sink
show logging file content
Output the messages in the log file to the CLI console
show logging server
condition
Display the filter conditions defined for the Syslog
output sink
show logging session
condition
Display the filter conditions defined for message logging
to the current console session
Table 66: Logging configuration CLI commands (continued)
Command Description
2 of 2