Avaya Media Gateway G250, Administration Manual

Page: 545 / 840

Configuring VRRP
Issue 5 June 2008 545
●
Use the
ip vrrp preempt
command to configure a router to preempt a lower priority
master for the virtual router ID. Use the
no
form of this command to disable preemption for
a virtual router instance. By default, preemption is enabled.
●
Use the
ip vrrp primary
command to set the primary address used as the source
address of VRRP packets for the virtual router ID. Use the
no
form of this command to
restore the default primary address for a virtual router instance. By default, the primary
address is selected automatically by the device.
●
Use the
ip vrrp priority
command to set the virtual router priority value used when
selecting a master router. Use the
no
form of this command to restore the default value.
●
Use the
ip vrrp timer
command to set the virtual router advertisement timer value for
the virtual router ID. Use the
no
form of this command to restore the default value.
●
Enter
router vrrp
to enable VRRP routing. Use the
no
form of this command to disable
VRRP routing.
●
Use the
show ip vrrp
command to display VRRP information.
Summary of VRRP commands
For more information about these commands, see Avaya G250 and Avaya G350 CLI
Reference , 03-300437.
Table 137: VRRP CLI commands
Root level
command Command Description
interface
(fastethernet|
vlan)
Enter the
FastEthernet
or
VLAN
interface
configuration context
ip vrrp
Create a virtual router on an interface
ip vrrp address
Assign an IP address to a virtual router
ip vrrp auth-key
Set the virtual router simple password
authentication key for the virtual router ID
ip vrrp override
addr owner
Accept packets addressed to the IP addresses
associated with the virtual router, such as
ICMP, SNMP, and telnet (if it is not the
IP address owner)
ip vrrp preempt
Configure a router to preempt a lower priority
master for the virtual router ID
1 of 2