Avaya Media Gateway G250, Administration Manual

Page: 148 / 840

Configuring Standard Local Survivability (SLS)
148 Administration for the Avaya G250 and Avaya G350 Media Gateways
6. At the SAT, enter
change system-parameters mg-recovery-rule 1
to display the
System Parameters Media Gateway Automatic Recovery Rule form. For example:
7. Type a description of the rule in the Rule Name field.
8. Set the Migrate H.248 MG to primary field to immediately .
Note:
Note:
The immediately field value is only one of the four possible choices. See the
Administrator Guide for Avaya Communication Manager , 03-300509 for more
information on the values for this field.
9. Submit the form.
10. At the SAT, enter
add media-gateway next
to display the Media Gateway form. For
example:
11. Verify the following fields:
●
Name field (20 characters maximum) must match the administered name of the
gateway (see Step 2 of Configuring the SLS data through the CLI on page 173).
change system-parameters mg-recovery-rule 1 Page 1 of 1
SYSTEM PARAMETERS MEDIA GATEWAY AUTOMATIC RECOVERY RULE
Recovery Rule Number: 1
Rule Name : _____________
Migrate H.248 MG to primary: immediately
Minimum time of network stability: 3
WARNING: The MG shall be migrated at the first possible opportunity. The MG may
be migrated with a number of active calls. These calls shall have their talk
paths preserved, but no additional processing of features shall be honored. The
user must hang up in order to regain access to all features.
NOTE: set 'Migrate H.248 MG to primary' to Blank to disable rule.
add media-gateway next Page 1 of 1
MEDIA GATEWAY
Number: 2 MGP IP Address:
Type: g250 FW Version/HW Vintage:
Name : Denver Gateway1 MAC Address:
Serial No: Encrypt Link? y
Network Region: Location: 1
Registered? n Controller IP Address:
Recovery Rule : 1 Site Data:
Slot Module Type Name
V1:
V2:
V3:
Max Survivable IP Ext :