Avaya Media Gateway G250, Administration Manual

Page: 324 / 840

Configuring WAN interfaces
324 Administration for the Avaya G250 and Avaya G350 Media Gateways
Configuring a track list
1. Use the
track id list
command to enter track list configuration mode, to specify the
unique ID of the track list (from 1 to 50), and to specify how to calculate the state of the
track list. The calculation can be either a Boolean or a Threshold calculation.
For example:
Or
Note:
Note:
If you do not specify how to calculate the state of the track list, it is calculated by
default using the Boolean AND argument. This means that the list is up if all
objects are up, and down if one or more of the objects are down.
2. Use the
description
command to enter a description for the track list. For example:
3. Use the
object
command to add an object tracker to the list.
Note:
Note:
The object tracker can be a simple one tracking a single RTR, or a track list. For
example:
4. Repeat step 3 to add as many object trackers as you require, up to a maximum of 50.
5. If you specified a Threshold method of calculation in step 1, use the
threshold count
command to enter the threshold values. For example, use the following command to
specify that:
●
The state of the object tracker will change from down to up if 2 or more hosts are up,
and
●
The state of the object tracker will change from up to down if 1 or less hosts are up
G350-001(config)# track 10 list boolean or
G350-001(config-track list 10)#
G350-001(config)# track 10 list threshold count
G350-001(config-track list 10)#
G350-001(config-track list 10)# description "track list rtr-5 and rtr-6"
Done!
G350-001(config-track list 10)# object 1
Done!
G350-001(config-track list 10)# threshold count up 2 down 1
Done!