Avaya Media Gateway G250, Administration Manual

Page: 166 / 840

Configuring Standard Local Survivability (SLS)
166 Administration for the Avaya G250 and Avaya G350 Media Gateways
Collecting DS1 trunks data
1. At the SAT, enter
display ds1 location
to display the DS1 administration for a
particular circuit pack
location
.
2. Gather DS1 information according to Table 40 for each DS1 facility.
2 Network
(Japan) Needs
Connect
Before
Disconnect Sends a CONNECT message before sending a
DISCONNECT message, if enabled
2 Send Name Specifies whether the Group Name is to be specified with
the message sent while connecting to the network
2 Send Calling
Number Specifies whether the Trunk Group Number is to be
specified with the message sent while connecting to the
network
2 Incoming
Calling Number
- Format Specifies how to fill the Calling Party Number and Called
Party Number IEs
1 Incoming
Destination Sets a destination station for routing incoming trunk group
calls
1 Trunk Hunt Determines the method in which the
survivable-call-engine selects an available trunk from the
trunk group pool
6 Sig Grp Specifies the Signaling Group Number that is the
manager of this ISDN trunk member
* Page numbers might vary for your system.
Table 40: DS1 circuit pack data to assemble for SLS
Page
*
Field Name Notes
1 Name Descriptive name often of the Service Provider or
destination of the DS1 facility
1 Bit-Rate Selects the maximum transmission rate of the DS1 facility
1 of 2
Table 39: Trunk group data to assemble for SLS (continued)
Page
*
Field Name Notes
3 of 3