Avaya Media Gateway G250, Administration Manual

Page: 159 / 840

Configuring SLS
Issue 5 June 2008 159
Collecting analog stations data
1. At the SAT, enter
list media-gateway
to display a list of administered gateways.
2. Look for one of the following supported gateways in the Type field:
●
G250/G250-BRI/G250-DCP/G250-DS1
●
G350
3. Once you know the media gateway of interest, match the gateway model with the analog
station ports:
4. At the SAT, enter
display port port-number
, where
port-number
is the analog
station port on the gateway.
The system displays the extension number assigned to the port.
5. Once you know the extension, enter
display station extension
to display the
Station form for this extension.
6. Gather the necessary information from Table 35 .
Table 34: Matching the gateway with the analog station ports
Gateway
model Media module
(if applicable) Slot configuration
G250-Analog V3
G350 MM711
MM714
MM716
Slot V7
(ana-imm1t2l)
Table 35: Analog station form data to assemble for SLS 1 of 2
Page
*
Field Name Notes
1 Extension
1 Port The port address correlates the analog stations that belong
to a particular media gateway. If the port ID includes the
media gateway number, then it is accepted. A new station
slot/port entry must include the "V", as in "V305".
1 Type Only
2500
is the accepted Type
1 Survivable COR Class of Restriction while in SLS mode
1 Survivable Trunk Dest Trunk destination while in SLS mode