Avaya Media Gateway G250, Administration Manual

Page: 179 / 840

Configuring SLS
Issue 5 June 2008 179
* You cannot select these modules/ports if they are already assigned as DID trunks.
Examples
●
set port v305
sets the previously-administered analog station "1234567" to the
fifth physical analog station port on the G250-Analog gateway’s media module.
●
set port v401
sets the previously-administered dcp station "1234567" to the first
physical DCP station port on the G250-DCP gateway’s media module.
●
set port v302
sets the previously-administered analog station "1234567" to the
first physical analog station port on the G250-BRI gateway’s media module.
4. Enter
set cor cor
to set the class of restriction (COR) for this extension, where
cor
is
one of the following:
●
emergency
● internal
(default)
●
local
● toll
●
unrestricted
Table 49: Module-port values in SLS station configuration mode
Gateway Media
module Analog station
ports
*
DCP
G250 V305, V306
G250-BRI V302, V303
G250-DCP V305, V306 V401-V412
G250-DS1 V302, V303
G350
V702, V703
MM312 24 possible ports
MM711 8 possible ports
MM712 8 possible ports
MM714 4 possible ports
(ports 1-4)
MM716 24 possible ports
MM717 24 possible ports