Avaya Media Gateway G250, Administration Manual

Page: 72 / 840

Accessing the Avaya G250/G350 Media Gateway
72 Administration for the Avaya G250 and Avaya G350 Media Gateways
●
Use the
show port dot1x
command to display all the configurable values associated
with the authenticator port access entity (PAE) and backend authenticator. To display
values for a particular port, type the module and port numbers after the command. If you
do not enter a module and port number, the command displays values for all ports on
which 802.1x can be configured. For example:
Port PortAuth Port Re Quiet ReAuth Server Supp Tx Max
Number Mode Control Auth Period Period Timeout Timeout Period Req
------ --------- -------- ---- ------ ------ ------- ------- ------ ---
6/1 PortBased Auto Disa 60 3600 30 30 30 2
6/2 PortBased Auto Disa 60 3600 30 30 30 2
Port Total Authenticated Authenticating
Number Supp Supplicants Supplicants
------ ----- ------------- --------------
6/1 0 0 0
6/2 0 0 0
Table 8: 802.1x Show Port output description
Column Description
Port Number Number of the module and port
Port Auth Mode The authentication mode. Possible modes are:
●
MAC-Based
● Port-Based
Port Control Port control type. Valid values include:
● force-authorized
●
force-unauthorized
● auto
Re Auth The state of re-authentication on the port. Possible
states include:
●
Enabled
. The port connection is re-authenticated
after the reAuthPeriod.
●
Disabled
. The port connection is not
re-authenticated. The reAuthPeriod is ignored.
Quiet Period The amount of time, in seconds, between sending
authentication requests
ReAuth Period The time, in seconds, after which the port connection
should be re-authenticated
Server Timeout The amount of time, in seconds, the G250/G350 waits
for a response from the RADIUS server
1 of 2