Avaya Media Gateway G250, Administration Manual

Page: 182 / 840

Configuring Standard Local Survivability (SLS)
182 Administration for the Avaya G250 and Avaya G350 Media Gateways
7. If the far-end equipment is specified as
pbx
(set in Step 6), enter
set interface
glare-mode
to specify the glare-handling convention, where
glare-mode
can be one of
the following values:
●
For non-QSIG calls:
-
network
. If the gateway is connected to a host computer and encounters glare, it
overrides the far-end
-
user
. If the gateway is connected to a public network and encounters glare, it
releases the circuit
●
For QSIG calls:
-
peerMaster
. SLS overrides the other end when glare occurs
-
peerSlave
. SLS releases the circuit when glare occurs
8. If the DS1 link is employed with ISDN, and the glare-handling convention is specified as
peerMaster
or
peerSlave
for the ISDN link (set in Step 7), enter
set side side
to
specify the glare mode: either
a
or
b
.
9. If the DS1 link is employed with ISDN, enter
set country-protocol country-code
to specify the ISDN Layer 3 country protocol type, where
country-code
is one of the
values in Table 50 :
Table 50: ISDN Layer 3 country codes
Country
Code Country
1
United States (AT&T mode, also known as 5ESS)
2
Australia (Australia National PRI)
3
Japan
4
Italy
5
Netherlands
6
Singapore
7
Mexico
8
Belgium
9
Saudi Arabia
10
United Kingdom (ETSI)
11
Spain
12
France (ETSI)
1 of 2