Avaya Media Gateway G250, Administration Manual

Page: 343 / 840

Priority DLCI
Issue 5 June 2008 343
●
VLAN interface configuration:
●
Serial interface configuration:
Note:
Note:
Some LAN data applications do not support fragmented packets. In this case, do
not change the MTU from its default of 1500.
●
VoIP configuration:
●
Static routes configuration:
* Description of footnoted commands (also applies to identical stages in configuring Site B):
(1) At this stage you apply Priority 7 to Voice Control traffic.
(2) At this stage you apply Priority 6 to RTP traffic.
(3) At this stage you apply maximum trust between 802.1p priority and DSCP.
(4) At this stage the number of connections (20) depends on the number of phones.
(5) At this stage you are matching the RTP port range to that of the G350.
(6) At this stage the default queue size is 6, and since RTP is enabled you can double the VoIP
queue size.
G350-001# interface Vlan 1
G350-001(if:Vlan 1)# ip address 149.49.54.24
Done!
G350-001(if:Vlan 1)# exit
G350-001# interface Vlan 2
G350-001(if:Vlan 2)# ip address 11.11.11.1 24
Done!
G350-001(if:Vlan 2)# exit
G350-001# interface serial 4/1
G350-001(if:Serial 4/1)# ip address 2.2.2.1 24
G350-001(if:Serial 4/1)# mtu 300
G350-001(if:Serial 4/1)# bandwidth 128
G350-001(if:Serial 4/1)# ip rtp header-compression
G350-001(if:Serial 4/1)# ip rtp compression-connections 20 (4)
G350-001(if:Serial 4/1)# ip rtp port-range 2048 3028 (5)
G350-001(if:Serial 4/1)# exit
G350-001# ip default-gateway 4/1