Avaya Media Gateway G250, Administration Manual

Page: 372 / 840

Configuring contact closure
372 Administration for the Avaya G250 and Avaya G350 Media Gateways
Contact closure software configuration
You can specify the following contact closure modes:
To configure the Avaya G250/G350 Media Gateway to activate contact closure when the feature
access code is dialed:
1. Enter the
set contact-closure admin
command.
In the following example, the command sets contact closure to work in relay 1 of the Avaya
Partner Contact Closure Adjunct™ when activated by the call controller.
2. Use the
set contact-closure pulse-duration
command to set the length of time
for the relay to return to normal after the call controller triggers it.
In the following example, the command sets relay 2 of the Avaya Partner Contact Closure
Adjunct™ to return to normal five seconds after the call controller triggers contact closure
in the relay.
To activate contact closure manually, use the
set contact-closure admin
command with
the parameter
manual-trigger
.
In the following example, the command activates contact closure in relay 1 of the Avaya Partner
Contact Closure Adjunct™. Contact closure remains active until you deactivate it by using the
set contact-closure admin
command with the parameter
manual-off
or
mgc
.
To deactivate contact closure manually, use the
set contact-closure admin
command
with the parameter
manual-off
.
Table 98: Contact closure modes
Mode Description
mgc The MGC controls contact closure. In mgc mode, the user
dials feature access codes to activate and deactivate contact
closure.
manual-trigger Activates contact closure for the specified relay
manual-off Deactivates contact closure for the specified relay
set contact-closure admin 10/1:1 mgc
set contact-closure pulse-duration 10/1:2 5
set contact-closure admin 10/1:1 manual-trigger