Avaya Media Gateway G250, Administration Manual

Page: 685 / 840

Synchronization status
Issue 5 June 2008 685
Displaying synchronization status
Enter
show sync timing
to display the status of the primary, secondary, and local clock
sources. The status can be
Active
,
Standby
, or
Not Configured
. The status is
Not
Configured
when a source has not been defined, for example, when there are no T1 cards
installed.
Summary of synchronization commands
For more information about these commands, see Avaya G250 and Avaya G350 CLI
Reference , 03-300437.
Table 152: Synchronization CLI commands
Command Description
clear sync
interface
Disassociate a previously specified interface as the primary or
secondary clock synchronization source
set sync
interface
Define the specified module and port as a potential source for clock
synchronization for the media gateway
set sync source
Specify which clock source is the active clock source. The identity of
the current synchronization source is not stored in persistent
storage.
set sync
switching
Toggle automatic sync source switching
show sync timing
Display the status of the primary, secondary, and local clock sources