manualshive.com logo in svg

Avaya Media Gateway G250, Administration Manual

The Avaya Media Gateway G250 is a powerful telecommunications product designed for seamless communication within organizations. This overview highlights its exceptional capabilities and emphasizes free manual download options, ensuring users can access comprehensive instructions effortlessly. Discover more about this feature-rich device and download your user manual from manualshive.com.

Share
Download
background image

Contents

Issue 5 June 2008

15

Analyzing RTP statistics output   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

417

Viewing RTP statistics summary reports   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

417

Viewing RTP session statistics .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

418

Viewing QoS traps, QoS fault traps, and QoS clear traps.  .  .  .  .  .  .  .  .  .  

425

Analyzing QoS trap output  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

426

Analyzing QoS fault and clear trap output .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

429

Viewing automatic traceroute results   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

431

RTP statistics examples .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

432

Configuring the RTP statistics application for a sample network  .  .  .  .  .  

432

A call over the WAN from an analog phone to an IP phone.  .  .  .  .  .  .  .  .  

436

A local call between an IP and an analog phone   .  .  .  .  .  .  .  .  .  .  .  .  .  .  

438

A remote call over the WAN from an IP phone to an IP phone .  .  .  .  .  .  .  

440

A conference call   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

443

Summary of RTP statistics commands   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

445

Configuring and analyzing packet sniffing   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

446

What can be captured .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

447

Streams that can always be captured   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

447

Streams that can never be captured  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

447

Streams that can sometimes be captured  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

447

Configuring packet sniffing .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

448

Enabling packet sniffing.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

448

Limiting packet sniffing to specific interfaces .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

448

Creating a capture list .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

449

Defining rule criteria for a capture list  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

449

Viewing the capture list  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

456

Applying a capture list.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

456

Configuring packet sniffing settings .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

457

Starting the packet sniffing service   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

458

Analyzing captured packets   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

459

Stopping the packet sniffing service .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

459

Viewing packet sniffing information  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

459

Uploading the capture file .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

460

Analyzing the capture file .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

462

Simulating packets   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

464

Summary of packet sniffing commands  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

465

Reporting on interface status .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

467

Summary of interface status commands.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

468

Configuring and monitoring CNA test plugs.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

469

CNA test plug functionality  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

469

Test plug actions.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

469

Summary of Contents for Media Gateway G250









































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Media Gateway G250

QTS AN-X3-GENI User Manual preview
AN-X3-GENI
Brand: QTS Pages: 62
TRENDnet TPE-105i Quick Installation Manual preview
TPE-105i
Brand: TRENDnet Pages: 4
NetLink 700-883-PRO42 User Manual preview
700-883-PRO42
Brand: NetLink Pages: 68
MSA fieldserver EZ Series Operating Manual preview
fieldserver EZ Series
Brand: MSA Pages: 61
Artila Matrix-752 Hardware Manual preview
Matrix-752
Brand: Artila Pages: 22
IC nexus VPC100 Series Quick Start Manuals preview
VPC100 Series
Brand: IC nexus Pages: 36
Check Point QUANTUM SPARK 1600 Administration Manual preview
QUANTUM SPARK 1600
Brand: Check Point Pages: 285
SmartRG SR500n User Manual preview
SR500n
Brand: SmartRG Pages: 35
Optoma WPS Pro User Manual preview
WPS Pro
Brand: Optoma Pages: 48
Cree SmartCast Wireless Gateway Installation Instructions preview
SmartCast Wireless Gateway
Brand: Cree Pages: 2
quiko QK-KEY Installation Manual preview
QK-KEY
Brand: quiko Pages: 5
Avaya G650 Installation Instructions Manual preview
G650
Brand: Avaya Pages: 298
Avaya W310 Command Reference Manual preview
W310
Brand: Avaya Pages: 440
UTC Fire and Security M3000 Installation Manual preview
M3000
Brand: UTC Fire and Security Pages: 174
IAI RCM-GW-PR Operation Manual preview
RCM-GW-PR
Brand: IAI Pages: 125
Replus Micro Replus Gateway Instructions Manual preview
Micro Replus Gateway
Brand: Replus Pages: 8
DAINCUBE DGW-CE User Manual preview
DGW-CE
Brand: DAINCUBE Pages: 22
Watlow RMA PLUS RMAP-AA Series User Manual preview
RMA PLUS RMAP-AA Series
Brand: Watlow Pages: 75

Brands by name

Popular brands

Load more brands