Deploying Avaya IP Office™ Platform IP500 V2
Page 26
15-601042 Issue 30j (18 May 2015)
IP Office™ Platform 9.1
Comments on this document? [email protected]
1.8.1 IP500 External Expansion Modules
The following IP500 external expansion modules are supported by IP Office Release 9.1. Each module uses an external
power supply unit
supplied with the module. A locale specific
power cord
for the PSU must be ordered
separately.
The external module can be stacked on top of the control unit. They can also be wall or rack mounted using one of the
IP
Office mounting kits
.
·
Systems running in IP Office Basic Edition modes support up to 8 external expansion modules so long as the
system extensions limit is not exceeded.
·
Systems running in IP Office standard modes support 8 external expansion modules or 12 if the control unit is
fitted with an IP500 4-Port Expansion Base Card.
·
IP500 Digital Station Module
Provides, depending on variant, an additional 16 or 30 RJ45
DS
ports for
supported
Avaya DS digital phones
.
·
IP500 Digital Station A Module
Provides, depending on variant, RJ21 ports for connection of an additional 16
or 30
Avaya BST digital phones
. Supported by IP500 V2 only.
·
IP500 Digital Station B Module
Provides, depending on variant, an additional 16 or 30 RJ45 ports. These can
be used as either
DS
ports for supported
Avaya DS digital phones
or
BST
ports for supported
Avaya BST digital phones
. However, the
module can only support one port type at any time.
·
IP500 Phone Module
Provides, depending on variant, an additional 16 or 30
PHONE
ports for
connecting analog phones.
30
31
238
220
353
39
222
39
225
353
39
352
39
227
358