manualshive.com logo in svg

Avaya IP500, User Manual

Share
Download
Avaya IP500 User Manual Download Page 116

Deploying Avaya IP Office™ Platform IP500 V2

Page 116

15-601042 Issue 30j (18 May 2015)

IP Office™ Platform 9.1

Comments on this document? [email protected]

10. On-Boarding

On-boarding is a process through which you can register an IP500 V2 system for remote support and maintenance from
Avaya. The process of on-boarding is done using the IP Office Web Manager interface. 

This section is a short summary of on-boarding. For full details on configure and administer SSL VPN services, see the
Avaya IP Office SSL VPN Solutions Guide. You can download the guide from 

http://support.avaya.com

.

Summary Steps

1. Login to IP Office Web Manager 

2. On-Board the System 

This process has 3 main steps:

a. Obtain an Inventory File 

From the system export a file that contains an inventory of the equipment within the system. This file is
required in order to register the system for support. 

b. Register the System 

Register the system on the Avaya Global Registration Tool website and upload the system's inventory file.
Once the system is registered, an on-boarding file is provided for the system. This file contains configuration
settings for the SSL VPN service link. 

c. Upload an On-Boarding File 

Upload the on-boarding file to the system. The information within the file is used to update the system's
configuration.

Configuration Changes Caused by On-Boarding

When an on-boarding file is uploaded to the IP500 V2 system, it can make a number of changes to the system
configuration. It is important to be aware of these potential changes and to ensure that they are not subsequently
overwritten or removed. 

The changes are as follows. Those marked * are optional and depend on the settings included in the on-boarding file by
the service provider.

·

SSL VPN Service 
A new SSL VPN service is added to the Services section of the configuration. 

·

SNMP Alarms*
SNMP can be configured and two SNMP alarm traps added to the configuration. Note that this will overwrite any
existing SNMP settings if SNMP has already been configured. 

·

Short Codes*
Short codes can be added using the Set Hunt Group Night Service and Clear Hunt Group Night Service actions.
These can be used to enable and disable the SSL VPN service. 

·

IP Route*
A static IP route to the SSL VPN service can be added to the IP routes in the configuration. 

·

Security Certificate 
A security certificate for the SSL VPN service is added to the system's security settings. 

Summary of Contents for IP500



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands