Deploying Avaya IP Office™ Platform IP500 V2
Page 113
15-601042 Issue 30j (18 May 2015)
IP Office™ Platform 9.1
Comments on this document? [email protected]
Securing the System:
9.1 Changing the Default Security Settings
This process covers the minimal security changes required for the IP Office service run by the server. For full details of all
the IP Office security settings, refer to the IP Office Manager help.
To set the initial security configuration:
1. Start IP Office Manager.
2. Select File | Advanced | Security Settings.
·
If the Select IP Office Menu does not appear, click
.
3. Select the server and click OK.
4. Enter the administrator user name and password.
5. For a system with default security settings a number of warnings are displayed. Note each warning and click OK.
6. Select and change the following passwords:
a. System Password
This password is used by IP Office Manager for system software upgrades. The default password is
Administrator. Click on the Change button and enter a new password. Click OK.
b. Voicemail Password
This password is used by the Voicemail Pro server to connect to the IP Office system. When set, the same
password also needs to be set in the voicemail server's preferences using the Voicemail Pro client. The default
password is blank.
c. Monitor Password
This password is used by the System Monitor application to connect to the IP Office system using UDP or TCP.
If not set, the System Password set above is used instead. The default password is blank.
7. The Application Controls section indicates a number of unsecure interfaces used by the system. Deselect those
that are not required by the planned customer applications. As you select or deselect the controls, the Application
Support section below changes to show the effect of the change.
Application Control
Used by
Notes
TFTP Server
System Monitor
If disabled, in addition to disabling the other TFTP options below,
the system cannot support the network viewer component in the
System Monitor application.
TFTP Directory Read
IP DECT
If disabled, DECT operates without the system directory
feature.
TFTP Voicemail
Voicemail Pro
Enable only when the system is using a pre-IP Office Release 9.1
voicemail server.
Program Code
IP Office Manager
Used for upgrades from IP Office Manager, recommend disabling
when not required.
DevLink
DevLink
TAPI
TAPI/DevLink
Disable unless the customer site will use TAPI applications with
the IP Office.
HTTP Directory Read
one-X Portal for IP Office
Enable only when one-X Portal for IP Office is used. If disabled,
one-X Portal for IP Office operates without the personal directory
feature.
HTTP Directory Write
one-X Portal for IP Office
Enable only when one-X Portal for IP Office is used. If disabled,
one-X Portal for IP Office operates without the personal directory
update feature.
8. Click OK.
9. Click
Service Users. By default only the Administrator and EnhTcpaServer users are enabled.
a. Select EnhTcpaService. This service is used by one-X Portal for IP Office. If one-X Portal for IP Office is
being installed, we recommend that the password is only changed after that installation is completed. If one-X
Portal for IP Office is not being installed:
·
Click on the Change button and enter a new password for the service.
·
Click on Account Status and selected Disabled.
·
Click OK.
10.Click on the
icon to save the security changes.