Deploying Avaya IP Office™ Platform IP500 V2
Page 144
15-601042 Issue 30j (18 May 2015)
IP Office™ Platform 9.1
Comments on this document? [email protected]
12.2 Automating the Change to Standard Mode
If the only systems that you install are ones using IP Office standard modes, IP Office Manager can be set to
automatically default the system to IP Office standard mode.
·
!
WARNING
This process requires the IP Office system to reboot in order to complete the changes. The reboot ends any
current calls and services.
1. In IP Office Manager, select File | Preferences.
2. On the Preferences sub-tab, enable Default to Standard Mode.
3. With this option enabled, when a configuration for a new or defaulted system running in IP Office Basic Edition is
received by IP Office Manager, it will automatically be converted to a IP Office Essential Edition configuration.
4.
!
Important: IP Address Settings Default to Server
The conversion will set the DHCP mode to Server and the LAN addresses to their defaults of 192.168.42.1 and
192.168.43.1. Using IP Office Manager to change these settings to the required values.
5. This is a suitable time to begin
initial configuration
before sending the configuration back to the IP Office
system to restart in IP Office Essential Edition.
·
For a system to run in IP Office Essential Edition or IP Office Preferred Edition mode, its configuration must
include an Essential Edition license. A system without this license will not allow any telephony functions until
the license is added.
6. Sending the configuration back to the system restarts the system in IP Office Essential Edition mode.
96