manualshive.com logo in svg

Avaya IP500, User Manual

Share
Download
Avaya IP500 User Manual Download Page 372

Deploying Avaya IP Office™ Platform IP500 V2

Page 372

15-601042 Issue 30j (18 May 2015)

IP Office™ Platform 9.1

Comments on this document? [email protected]

13.14.8 CTI Licenses

·

CTI Link Pro : 
Enables CTI Link Pro functionality (TAPI Link Pro and DEVLink Pro).

·

Wave User :  
Allows streaming of WAV files, using TAPILink Pro, for 3rd party voice applications. This is a per user license. Note
that TAPI WAV calls use system data channels taken from the same pools as used for voicemail ports. The
maximum number of simultaneous TAPI WAV user calls and voicemail users is determined by the IP Office control
unit type; IP500 V2 =40. 

13.14.9 Other Licenses

·

Audix Voicemail :  
Enables IP Office to use a remote Intuity Audix or Modular Messaging system for voicemail rather than requiring a
local voicemail server. 

·

IPSec Tunneling :  
Enables the IP Office to initiate and terminate IPSec and L2TP tunnels. 

·

Avaya Contact Center Select 
This license is required for the support of Avaya Contact Center Select with IP Office Release 9.1.

Legacy Licenses

The following licenses are no longer available from Avaya but are still supported for systems upgraded to IP Office 9.1:

·

Mobility Features 
These legacy licenses were used to enable mobility features, for example mobile twinning or mobile call control,
for users set to the Basic User profile. For IP Office Release 8.0 and higher, the mobile twinning mobility feature
is automatically enabled for all users. This license was available in 1, 5 and 20 user variants which can be
combined for the total number of users enabled. 

·

one-X Portal for IP Office 
These legacy licenses were used to enable one-X Portal for IP Office support for users set to the Basic User
profile. The licenses were purchased as part of the IP Office 5 Power User license packages. 

·

UMS Web Services 
These licenses are used to enable UMS voicemail services support for users set to the Basic User profile. Other
users are enabled for UMS through their licensed user profile. These licenses are also used to license hunt groups
for UMS voicemail services. Each license enables 1 user. 

·

Advanced Edition: 
This legacy license is only supported for existing systems upgraded to IP Office Release 9.1. The Essential
Edition and Preferred Edition licenses are a pre-requisite for this license. It enables the additional features
listed below. Other features previously enabled by this license are now enabled by the Preferred Edition license.

·

Voicemail Pro call recording to ContactStore.

[3]

·

Voicemail Pro call flow generic TTS (8 ports).

[1][2]

1. Only supported on Windows based Voicemail Pro servers. 

2. Provides up to 8 ports of generic TTS for use with Speak Text actions within Voicemail Pro call flows. Not

used for user TTS email reading. Not supported for Linux based voicemail servers. 

3. Note: In a Small Community Network using centralized voicemail, this license only enables ContactStore

support for the central IP Office. Remote IP Offices in the network require their own Advanced Edition
license or a VMPro Recordings Administrator licenses. 

Summary of Contents for IP500



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands