Avaya IP500 Page 129 User Manual Download

Page: 129 / 402

Deploying Avaya IP Office™ Platform IP500 V2

Page 129

15-601042 Issue 30j (18 May 2015)

IP Office™ Platform 9.1

Comments on this document? [email protected]

SD Card Management: Restoring from the Backup Folder

3. From the menu select Memory Card.

4. Select System Restore.

The contents of the /backup folder on the System SD card are copied to the /primary folder. The process
takes approximately 6 minutes.

When the process has been completed, the system restarts.

11.5.4 Restoring from the Backup Folder Using IP Office Web Manager

To restore from the /backup folder using IP Office Web Manager

1. Login to IP Office Web Manager.

a. Enter the system's IP address in the browser. Select IP Office Web Manager. Alternatively, enter https://

<IP_Address>:8443/WebMgmtEE/WebManagement.html.

b. Enter an administrator user name and password and click Login.

2. Click Actions and select Restore.

2. For the destination select On Device.

3. Click Restore.

Summary of Contents for IP500



















































































































































































































































































































































































































Search results

Summary of Contents for IP500

Reviews:

Related manuals for IP500

Brands by name

Popular brands

Avaya IP500, User Manual

Search results

Summary of Contents for IP500

Reviews:

Related manuals for IP500

Brands by name

Popular brands