Deploying Avaya IP Office™ Platform IP500 V2
Page 220
15-601042 Issue 30j (18 May 2015)
IP Office™ Platform 9.1
Comments on this document? [email protected]
13.4.3 Digital Station 16/30
IP Office 500 Digital Station modules can be used to add additional
DS ports
to an IP Office system for support
Avaya
DS digital telephones
. The module is available in 16 and 30 port variants, referred to as the IP500 DS16 and IP500
DS30 respectively. These modules are also known as IP500 DS V2 modules. This module has been superseded by the
IP500 DS16B/30B
.
Feature
Details
Locales
Supported in all
IP Office locales
.
Software Level
IP Office core software level 2.1(31) minimum. Bin file = nadcpV2.bin.
Included
Power supply unit (see below) and Expansion Interconnect cable.
Power Supply
The module is supplied with a Earthed 3-Pin, 60W external power supply module. The PSU has an
integral power cord for connection to the module's DC I/P socket. A locale specific
IEC60320 C13
power cord
for the external PSU is required but is not supplied with the module.
Mounting
The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be wall or rack mounted using the
IPO IP500 RACK MNTG KIT V3
.
Dimensions
Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8".
Weight
Unboxed: 3.5Kg/7.8lbs. Boxed: 4.8Kg/10.8lbs. (Based on DS30)
Module Front
Port
LEDs
·
Green Flashing = Phone detected.
·
Green On = Phone active.
Module
Center
LED
The center LED on all external expansion modules is used to indicate the overall state of the module as
follows:
·
Red flashing = Module starting up/Loading firmware.
·
Red on = Error.
·
Green on = Module okay.
353
39
225
43
30
238