Deploying Avaya IP Office™ Platform IP500 V2
Page 53
15-601042 Issue 30j (18 May 2015)
IP Office™ Platform 9.1
Comments on this document? [email protected]
Installation Requirements: Environmental Requirements
2.2 Space Requirements
IP Office control units and modules are designed to be installed either in a free-standing stack or into a 19" rack system.
Rack installation requires a
rack mounting kit
for each control unit and expansion module.
·
Cable Clearance
Clearance must be provided at the front and rear of all modules for cable access. On IP500 V2 systems allow a
minimum clearance of 90mm (3.5 inches).
·
Additional Clearance
Care should be taken to ensure that the positioning of the modules does not interrupt air flow and other factors
that may affect
environmental requirements
. This is especially important on IP500 V2 control units which have
ventilation slots at the side.
·
Cable Access
Power cords must not be attached to the building surface or run through walls, ceilings, floors and similar
openings. Installation measures must be taken to prevent physical damage to the power supply cord, including
proper routing of the power supply cord and provision of a socket outlet near the fixed equipment or positioning of
the equipment near a socket outlet.
37
52