Deploying Avaya IP Office™ Platform IP500 V2
Page 93
15-601042 Issue 30j (18 May 2015)
IP Office™ Platform 9.1
Comments on this document? [email protected]
Installing the Physical System: Connecting Phones
·
!
Important
The default types cannot be changed after installation without defaulting the configuration. Therefore you must
ensure that you connect the correct type of phone to each port. If you need to swap phones, uses the process for
exchanging extension numbers
rather than swapping wiring.
1. Using IP Office Manager, receive the configuration from the system.
2. Select Extension.
3. Selecting each extension in turn, on the Extn tab, check that the Device Type field is set to the correct phone
model.
Default Type
Possible Phone Models
T7100
T7100, M7100, M7100N, Audio Conferencing Unit.
T7208
T7208, M7208, M7208N.
M7310
T7406E, T7406, M7310, M7310N
M7310BLF
T7316, M7310BLF
M7324
M7324, M7324N
4. Save the configuration back to the IP Office system.
7.8.5 IP/SIP Phones
The installation and configuration of H323 and SIP IP telephones is not covered by this document. Refer to the
appropriate IP Office installation manual for the type of phone being installed.
169