manualshive.com logo in svg

Avaya IP500, User Manual

Share
Download
Avaya IP500 User Manual Download Page 202

Deploying Avaya IP Office™ Platform IP500 V2

Page 202

15-601042 Issue 30j (18 May 2015)

IP Office™ Platform 9.1

Comments on this document? [email protected]

13.2.5 Unified Communications Module

This card is an embedded server that allows Linux based IP Office applications to be run within the IP Office control unit
rather than requiring separate PCs. The IP address of the server is set during its initial configuration and can then be
changed through web browser access to the server.

There are two type of card. The Unified Communications Module v2 is supported by IP Office Release 9.1 and higher. The
Unified Communications Module v1 is supported for IP Office Release 8.0 Q1 2012 Service Pack or higher. Though
physically different, the two types of card current support the same applications and application capacities. However, the
v2 does not provide an implied Preferred Edition license and is not supplied with pre-installed software. 

Unified Communications Module v1

  

Unified Communications Module v2

·

Supports 
Voicemail Pro and or one-X Portal for IP Office applications. The card is not supported by systems running in IP
Office Basic Edition mode.

·

IP Office Users: Up to 200 users when running Voicemail Pro and one-X Portal for IP Office. More than 200
users when running just Voicemail Pro.

·

Simultaneous one-X Portal for IP Office Users: 50.

·

Maximum voicemail ports: Up to 20 ports when running Voicemail Pro and one-X Portal for IP Office. Up to
40 ports when running just Voicemail Pro.

·

Small Community Network: Maximum 6 systems. 

·

Licenses 
For both card types, an Essential Edition license is required as a pre-requisite. The voicemail server on the card
also requires the system to have a Preferred Edition license. 

·

The Unified Communications Module v1 acts as an automatic Preferred Edition license for the IP Office
system. 

·

For the Unified Communications Module v2, a separately installed Preferred Edition license is required. 

·

Maximum per Control Unit: 1 per control unit. 

·

IP500 Trunk Card Support: 

 

·

!

 WARNING: 

The Unified Communications Module v1 card is supplied with a removable plastic cover that locates over the
external ports (LAN, USB and HDMI) on the faceplate of the card. This cover should always be in place during
normal operation of the card. The cover should only be temporarily removed during maintenance actions that
require access to the ports and should be replaced when the maintenance is completed.

·

!

 WARNING: Card Remains Hot After System Shutdown 

When removing an Unified Communications Module from a system, care should be taken not to touch the heat sink
on the module. The heat sink remains hot for a long period after system shutdown.

Name

Description

SAP Code

IPO UC MODULE

IP Office Unified Communications Module v1

700501442

IPO UC MODULE V2

IP Office Unified Communications Module v2

700507449

Summary of Contents for IP500



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands