Autodesk ALIAS 2010 Page 443 Manual Download | Manualshive

Page: 443 / 746

background image

4

Choose Pick > Nothing to deselect the surfaces.

Layer Symmetry

You used mirror to create the lower surfaces, so that the top surfaces can be
modified, by adding a screen, and the lower surfaces can be modified by adding
buttons.

For the left and right sides of the design however, you want the geometry to
be the same on both sides. So for the left and right sides, you will use Layer
Symmetry to view a mirror image of the geometry, which will update as you
continue to build surfaces.

1

Choose Layers > New to create a layer for the front casing.

2

Double-click in the layer tab and rename the layer Front Casing.

3

Choose Pick > Object and drag a pick box over all the surfaces to select
them.

4

Choose Assign from the Front Casing layer tab sub-menu.

Part 3: Completing the Casing | 437

«
...
441
442
443
444
445
...
»

Summary of Contents for ALIAS 2010











































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ALIAS 2010

CORPORATE SUITE

Brand: KAPERSKY Pages: 36

Brand: Alphasmart Pages: 4

GHOST IMAGING FOUNDATION 7.1

Brand: Symantec Pages: 189

Integrated Fiery Color Server

Brand: Xerox Pages: 24

Brand: VeriFone Pages: 25

CLUSTER SUITE 4.7 - CLUSTER LVM ADMINISTRATORS

Brand: Red Hat Pages: 108

Brand: Juniper Pages: 14

MAPCREATE USA 6.3 - ADDENDUM

Brand: LEI accessories Pages: 1

Brand: Qlogic Pages: 284

SmartCell ZX-250

Brand: Cabletron Systems Pages: 34

Parallels Desktop 4.0

Brand: Parallel Pages: 2

Brand: Datalogic Pages: 100

Brand: Datavideo Pages: 141

SEAL-IT SEAL-IT 100

Brand: Velocity Pages: 38

EOS DIGITAL REBEL XT/350D DIGITAL

Brand: Canon Pages: 42

Brand: Mackie Pages: 26

MSL4048 - StorageWorks Ultrium 920 Tape Library

Brand: HP Pages: 4

Brand: HP Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands