Autodesk ALIAS 2010 Page 155 Manual Download

Page: 155 / 746

(e) All the other objects go gray

When using Transform > Scale, if the object is already selected where is
the best place to click and drag to specify the scaling?

(a) Away from all geometry, in the gray background

(b) Touching the object

(d) On another, unselected, object

(e) In the control panel

What action does holding the

Shift

and

Alt

(Windows) or

Option

(Mac)

keys together, and using the right mouse button do?

(a) Move an object vertically

(b) Delete an object

(d) Scroll the Palette up and down

(e) Save the file

Which button or key is used to specify movement or scaling in the
horizontal direction in the Top, Left and Side views?

(a) Left mouse button

(b) Middle mouse button

(d) The

Alt

(Windows) or

Option

(Mac) key

(e) The

Ctrl

(Windows) or

Control

(Mac) key

Which location is the best one to save your data into?

(a) In the

user_data

directory.

(b) In My Documents

user_data

Summary of Contents for ALIAS 2010











































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ALIAS 2010

Reviews:

Related manuals for ALIAS 2010

Brands by name

Popular brands

Autodesk ALIAS 2010, Manual

Search results

Summary of Contents for ALIAS 2010

Reviews:

Related manuals for ALIAS 2010

Brands by name

Popular brands