Autodesk ALIAS 2010 Page 425 Manual Download

Page: 425 / 746

Choose Pick > Nothing to complete the surface creation.

Now you will build the chamfered surfaces.

Double-click the Draft icon to open the option window again. Change
the settings to an Angle of -45 degrees, and a Surface Depth of 5.

NOTE

You will build the chamfered surface to an approximate length. The

front face of the MP3 player will later be used to trim the side walls to the
correct height.

Pick the three top edges of the draft surfaces as the input curves for the
new draft surfaces.

Part 2: Creating the Side Surfaces | 419

Summary of Contents for ALIAS 2010











































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ALIAS 2010

Reviews:

Related manuals for ALIAS 2010

Brands by name

Popular brands

Autodesk ALIAS 2010, Manual

Search results

Summary of Contents for ALIAS 2010

Reviews:

Related manuals for ALIAS 2010

Brands by name

Popular brands