Autodesk ALIAS 2010 Page 360 Manual Download

Page: 360 / 746

The original upper surface will be trimmed to create the recess for the button.

To avoid confusion with these copied surfaces, you will first create layers for
the body surfaces, and for the power button surfaces.

Choose Layers > New to create a layer.

Rename the layer body.

Choose Pick > Object . Click-drag a pick box over all the geometry to
select all the surfaces.

On the Layer Bar, click and hold on the body layer to see the pull-down
menu. Choose Assign to assign all the surfaces onto the layer.

Choose Pick > Nothing to deselect all the surfaces.

354 | Chapter 6 Modeling a Vacuum Cleaner

Summary of Contents for ALIAS 2010











































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ALIAS 2010

Reviews:

Related manuals for ALIAS 2010

Brands by name

Popular brands

Autodesk ALIAS 2010, Manual

Search results

Summary of Contents for ALIAS 2010

Reviews:

Related manuals for ALIAS 2010

Brands by name

Popular brands