Autodesk ALIAS 2010 Page 416 Manual Download

Page: 416 / 746

NOTE

The length of the line isn't important; it just needs to be snapped to

the center grid line, and be horizontal.

Now you will create the arc at the top of the MP3 player.

Choose Curves > Keypoint Curve Toolbox, then Keypoint Curve Tools >
Arcs > Arc Tangent to Curve .

You are prompted to

Select the curve at location to make arc tangent to.

Click the horizontal line and, without releasing the mouse button, drag
the start point to the left end of the line, where it meets the grid.

NOTE

The arc start point automatically snaps to the line, so you don't need

to use the curve snap (Ctrl and Alt (Windows) or Control and Command (Mac)).

You are prompted to

Enter end point of tangent arc.

Type -30,38,0 to position the end point.

410 | Chapter 7 Modeling an MP3 Player

Summary of Contents for ALIAS 2010











































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ALIAS 2010

Reviews:

Related manuals for ALIAS 2010

Brands by name

Popular brands

Autodesk ALIAS 2010, Manual

Search results

Summary of Contents for ALIAS 2010

Reviews:

Related manuals for ALIAS 2010

Brands by name

Popular brands