manualshive.com logo in svg

Autodesk ALIAS 2010, Manual, Page: 628 / 746

Share
Download
Autodesk ALIAS 2010 Manual Download Page 628

7

Change the color to orange by clicking the color wheel. You can modify
the color’s intensity in the HSV triangle. Close the window when you
have got a bright orange selected.

8

Notice that the color rectangle in the Visualization panel has changed
to orange.

9

Use the marking menu to pick nothing, then choose WindowDisplay >
Hardware Shade to see the model with an orange button.

10

For a better view without the wireframe, choose Model (unchecking it)
from the Show menu on the window bar to hide the wireframe.

622 | Chapter 9   An introduction to Rendering

Summary of Contents for ALIAS 2010











































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments