Autodesk ALIAS 2010 Page 111 Manual Download

Page: 111 / 746

Hold down the

Alt

(Windows) or

Command

(Mac) key to turn on grid snap

mode, and press and drag with the

left mouse button

in any direction. The

cylinder moves so that its pivot point always snaps to a grid intersection.

Drag the cylinder to the origin.

Release the

Alt

(Windows) or

Command

(Mac) key to turn off grid snap

mode.

NOTE

You can adjust the height of the base again using Transform > Non-p

Scale and the right mouse button. The location of the pivot point makes the
scaling easier to control.

Duplicating the cylinder

The cylinder now has a convenient pivot point location. To save time, copy
this cylinder and then move and scale it to create the other components.

With the cylinder still picked, choose Edit > Copy .

Choose Edit > Paste .

Part 2: Building the lampstand | 105

Summary of Contents for ALIAS 2010











































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ALIAS 2010

Reviews:

Related manuals for ALIAS 2010

Brands by name

Popular brands

Autodesk ALIAS 2010, Manual

Search results

Summary of Contents for ALIAS 2010

Reviews:

Related manuals for ALIAS 2010

Brands by name

Popular brands