Autodesk ALIAS 2010 Manual Download Page 191

Page: 191 / 746

Click and drag the

right mouse button

upwards to move the curve upwards.

Click and drag away from the selected curve to avoid picking the original
curve.

Move the curve so it is aligned with the top of the wavy edge of the
joystick base sketch.

With the curve still selected, click the CV/Hull check box in the Control
Panel Display section to turn the CVs and Hulls on.

The CVs and hulls appear.

Part 2: Creating the Joystick Base | 185

Summary of Contents for ALIAS 2010











































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ALIAS 2010

Reviews:

Autodesk ALIAS 2010, Manual, Page: 191 / 746

Search results

Summary of Contents for ALIAS 2010

Reviews: